PET (Polythylene terephalate) is the latest addition to the family of the thermoplastics which has revolutionized the packaging on the international scene. Our New version of stick on whiteboard is made of Recyclable PET.
We introduce this material because it has better performance. Increased durability from 3 years up to 5 years. Compare to PVC material whiteboard stickers.
The PET whiteboard is 25% thicker. Due to the nature of the whiteboard that it is designed to be written on and wiped repeatablly.The extra thickness ensures the longer service time for 5 years comparing to 3 years service time of PVC whiteboard stickers. The PET stick on whiteboard is harder than PVC stick on whiteboard. It is easy to cut and less problem of edge curling. Cover up impefection:The thickness of the product could cover the impefection marks better. However it has to be applied to a totally smooth and flat surface. It could not fix the uneveness. Most of the whiteboard product need wet cloth to clean. The PET whiteboard is smoother than the conventional whiteboard. It allows direct dry cloth clean without leaving stains.
Turn any flat surface into a dry erase whiteboard with this innovative, inexpensive and eco-friendly alternative to traditional marker boards. Versatile board with adhesive back to peel and stick on wall. Functions as wall decor or whiteboard. Completely erasable, reusable and recyclable. Easy to write, draw and erase.Effortlessly makes an office a conference room or a bedroom your homeschooling platform. Dimensions: 300 cm × 118 cm. Weight: 1.7 kg including packing material. Item comes with 6 pieces of dry erase marker, a mini eraser/ Microfiber Cleaning Cloth(random). Free chalkboard samples and chalk with. Choose a totally smooth surface that is clean and free from dust and moisture. This is critical to your installation. Avoid uneven surface and test the surface with the sample provided in the package.
Note that bare concrete, unpainted plaster, rendering, rough cast and newly painted walls are not suitable. Peel the seal tape off and rest the roll for 10 min to release tension. Mark the wall with a pencil and a straight edge to draw horizontal and vertical reference to ensure proper alignment. Unroll 30-50 cm of the sticker, then line the sticker up against the reference marks and tape the corners. Proceed unrolling until you have released about half of the material.
The reverse side of the sticker is self-adhesive. For size longer that 300cm use additional tape to secure the material in place. Apply 1 large piece of tape vertically dividing both sides of the decal, running from the top down to the bottom. Make sure the sticker is nice and straight. Unroll the entire sticker and tape down the other 2 corners.
Remove the tape from one side. The smoother will grab the backing while the holder peels the sticker to the middle point. Cut the backing paper peeled off halfway.
Use a soft cloth to apply pressure over the entire sticker, paying special attention to edges. Squeegee the air bubbles out to release any remaining trapped air.
If the air bubbles persist, peel off sticker and reapply by following the steps above. Remove the middle tape and repeat step 8 & 9 to finish the other side. Gently heat the sticker a bit by hair dryer when find it's hard to remove from applied surface.
We also accept Personal Check, Bank Deposits. This information is provided by the carrier and excludes weekends and public holidays. Due to the fact that the sticker products is not able to resell after it has been used, we are try to avoid. In that case, we need photo evidence. Note: Due to stock availability.
Item may be dispatched from either local or overseas stock. The item "Super Large Soft 300 x 118 cm Whiteboard Sticker 4 Marker 1 Eraser" is in sale since Monday, October 10, 2016. This item is in the category "Business\Whiteboards".The seller is "ycau" and is located in Brisbane, QLD. This item can be shipped to Australia, North, South, or Latin America, all countries in Europe, all countries in continental Asia, New Zealand.